Hall Effect Position Sensors - Non-Contacting Technology

Date Of Publication：2020-02-18 Click-Through Rate：423

Hall Effect Position Sensors - Non-Contacting Technology

REQUEST FOR QUOTE

BEI Sensors Hall effect sensors meet customer needs for high performance, non-contact rotary position sensor solutions. This product line features a standard operational life of 35 million cycles while providing up to 6-turns with 2160 degrees of resolution and linearity of +/-0.5%. Capable of having redundant outputs, meeting up to IP69K sealing requirements and operating temperatures of 85º C , these rotary hall effect sensors are ideal for a wide variety of applications. Ideal applications include steering, pedal and throttle for off-highway equipment, dancer controls in web processing, flow control valves and elevator door opener operations.

Hall Effect Rotary Sensors

Select by body style and series below, or browse and configure the ideal Hall effect sensor based on individual parameters

Shafted Body Style

Model 9360

Shafted 41mm rotary non-contacting sensor with 360° rotation and dual outputs. Option programmable versions available.

Shaft Size: 4.6mm
Resolution (Max): 12 Bit
Range of Motion: 15° to 360°
Standard Operating Temperature °C: -40 to +85
Extreme Environments: Wet, Dirty/Dusty, Extended Temperature, High Shock/Vibration

Sensors for dirty and dusty environments

Sensors for extended temperature environments

Sensor products high shock and vibration environments

View Data Sheet »

Configure

Model 9970

Shafted rotary Hall effect sensor that features a 50mm mounting hole spacing and a standard Amp, Superseal connector. The 9970 can use the full 360° travel range.

Shaft Size: 6mm
Resolution (Max): 12 Bits
Range of Motion: 30° to 360°
Standard Operating Temperature °C: -40 to +125
Extreme Environments: Wet, Dirty/Dusty, Extended Temperature, High Shock/Vibration

View Data Sheet »

Through Shaft Body Style

Model 8360

Through shaft 82mm non-contact position sensor featuring 360° rotation in a rugged, low-profile package.

Resolution (Max): 12x13 Bits
Range of Motion: 15° to 360°
Standard Operating Temperature °C: -30 to +85
Extreme Environments: Dirty/Dusty, Extended Temperature, High Shaft Load, High Shock/Vibration

Sensors and sensors for high shaft load environments

View Data Sheet »

Configure

Blind Shaft Body Style

	Model 9960 Blind shaft 37mm non-contacting sensor features 7 termination options and 24 active electrical angles. Bore Size: 9.5mm blade Resolution (Max): 12 Bit Range of Motion: 15° to 360° Standard Operating Temperature °C: -40 to +125 Extreme Environments: Wet, Dirty/Dusty, Extended Temperature, High Shock/Vibration View Data Sheet » Configure

	Model HCW4 Blind shaft 50mm non-contacting position sensor with incremental output. Bore Size: 6 to 10mm Resolution (Max): 1024 Range of Motion: 0° to 360° continuous rotation Standard Operating Temperature °C: -40 to +85 Extreme Environments: Wet, Dirty/Dusty, Extended Temperature, High Shaft Load, High Shock/Vibration View Data Sheet »

	Model ACW4 Blind shaft 50mm non-contacting position sensor available with analog, CANopen, PWM, or SSI output. Bore Size: 6 to 10mm Resolution (Max): 12 Bits Range of Motion: 15° to 360° PWM and analog 0° to 360° CANopen, SSI Standard Operating Temperature °C: -40 to +85 Extreme Environments: Wet, Dirty/Dusty, Extended Temperature, High Shaft Load, High Shock/Vibration View Data Sheet »Analog (PDF -121KB) CANopen (PDF -152KB) PWM (PDF -100KB) SSI (PDF -161KB)

	Model TCW4 Blind shaft 52mm non-contact position sensor available with analog, CANopen, PWM, or SSI output. Shaft Size: 6 to 10mm Resolution (Max): 12x13 Bit Range of Motion: 8,192-turns, continuous rotation Standard Operating Temperature °C: -20 to +85 Extreme Environments: Wet, Dirty/Dusty, Extended Temperature, High Shaft Load, High Shock/Vibration View Data Sheet »Analog (PDF -311KB) CANopen (PDF -255KB) PWM (PDF -241KB) SSI (PDF -304KB)

Programmable Hall Device

The PHD from BEI Sensors provides an easy way to take control of customizing the output of BEI Hall effect sensors. This compact programming unit provides users with the ability to field program output functions that meet specific requirements. The PHD can be used for both analog and PWM outputs. Sensors can even be programmed directly in place using the actual assembly movement as the sensor input. This allows users to match the full range of the assembly precisely with the sensor output.

The included PHD software makes programming simple with a user-friendly screen where output routines can be created, stored and recalled for later use. The system also gives users the ability to lock the sensor to prevent accidental reprogramming. With the PHD, BEI Hall effect position sensors can even be programmed directly in place using the actual assembly movement as the sensor input. This allows users to match the full range of the assembly precisely with the sensor output.

Data Sheet

User Manual

PHD Software

Next： Magnetic Rotary Enco

Last： Rotary and Linear Po

Electrical Products

Automatic Control

Data Acquisition and Sensors

Instruments and Tools

Electronics Products