Current Location: Home > FS-6 Press Brake Foot Switch Series Datasheet

FS-6 Press Brake Foot Switch

FS-6 Press Brake Foot Switch
Features:These foot switches are designed for some critical applications such press brake machine control.  These foot switches have at least one of the pedals with 3 positions, with a pressure point, to control dangerous movements.For press brake control as an example:press the pedal to lower down a press brake.  It has 4 working contacts ( 2NC+2NO) to drive the movement and one safety switches (1 positive opening NC contact + 1NO) to stop the movement.  Pressing the foot pedal, until the pressure point where resistance is noticeable.  This allows the changeover of the 2 working contacts and press is moving downward.  When press harder beyond the pressure point, the 2 working contacts return to their first position and the positive opening safety contact is activated as redundant safety circuit in order to initiate mmediately the dangerous movement.  A restart of the machine is only possible after releasing the foot switch.Installation dimensions:Specifications:Operating Frequency:            60 ops/min> Insulation Resistance:            >100mW @ 500V DCContact Resistance:              <25mWRated Current/Voltage:          10A/600V AC   A600/AC15   Q300/DC13Dielectric Strength:              1000VAC for 1 min between current carrying parts 2500VAC for 1 min between non- current carrying partsService Life:                    Mechanically     1 x106 (operations) Electrically        5 x105  (operations)Operating Temperature:         -30~+80oC  (-22~176oF)Degree of Protection:            IP65, NEMA type 2, 4, 13 (IP68, NEMA type 6, 6P available on request)